Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Yorba Linda
A new driveway gate in Yorba Linda typically runs $3,800-$9,500 installed for a standard steel or iron swing gate with automation, while ornamental custom work on hillside properties commonly lands between $9,000 and $22,000. Most installations take one to three days depending on post footings, operator type, and gate weight. We schedule Yorba Linda jobs within the week, and we always set the full price before a single bolt is turned.
We know this city’s gates the way only a company that has done this work for over 42 years can. The long driveways off Kellogg Drive. The horse properties along Lakeview Avenue and the winding hillside lots above Fairmont Boulevard. Every job is different, and that’s the point. Call us at (424) 395-3381 for a free estimate, and we will come out, measure, and give you a written price on the spot.
Why Ironworks Gate Co. Is Yorba Linda’s Preferred Gate Installation Company
Yorba Linda homeowners tend to be in their homes for twenty years or more. They’ve seen contractors come and go. What they want from a gate company is simple: show up when you say you will, build it right, and stand behind the work. That’s the standard we have held since 1984.
Our reputation in Yorba Linda is built on the jobs other companies turn down. A 22-foot sliding driveway gate on a hillside with clay soil movement. An ornamental double swing gate with matched intercom and camera entry on a custom estate. We do not bid low and tack on extras later. The price we quote is the price you pay, in writing, before work begins.
Crews are dispatched from our Los Angeles office and serve Yorba Linda directly, so you get the same team that handles the region’s most demanding gate work. A live person answers every call, 24 hours a day, 7 days a week. No voicemail trees, no “we’ll get back to you.” When your gate is down, you need a person. You get one.
Every job is finished under our 90-Day Done Right Promise. It’s a written guarantee, not a handshake. If something isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. That’s the Keystone Standard, and it applies to every gate we hang in Yorba Linda.
Our Gate Installation Services in Yorba Linda
Our Gate Installation team handles the full range, from simple pedestrian gates to automated estate entrances. Here’s what we install most often in Yorba Linda.
Driveway Gate
Driveway gates are the work we were built for. Yorba Linda’s custom homes, especially those on long hillside lots, demand gates that run quietly and true for years. We install steel and wrought-iron driveway gates with operators from brands we actually trust, because we service what we sell. Most driveway gates in Yorba Linda fall between $4,200 and $9,500 installed, including the operator, safety edges, and a keypad or remote setup.
Swing Gate
Swing gates are the most common style on Yorba Linda’s hillside custom homes, and they are also the most sensitive to what this area’s clay soil does over time. Post heave is real here. We set posts deeper on swing gates in the Puente Hills foothills, and we use heavier-gauge posts than the standard for standard residential installs. That’s not upselling. It’s knowing the ground we’re working in. A properly anchored swing gate with a quality operator runs $3,800-$8,500 installed.
Sliding Gate
Sliding gates suit Yorba Linda properties with steep driveways or limited swing clearance. The challenge here is Santa Ana wind. A long slide gate catches wind like a sail, and undersized track and rollers fail quickly. We size track and rollers for wind load, not just gate weight. Expect $5,500-$12,000 for a sliding gate installation with automation in Yorba Linda, depending on gate length and materials.
Security Gate
Security gates on Yorba Linda estates often combine a heavy ornamental gate with a keypad, intercom, and camera entry system. We handle the full scope: welding, operator integration, access control wiring, and matched hardware finishes. Our techs are trained on nine automation brands, including BFT, Linear, and Ghost Controls, so the operator matches the gate and your existing entry system. Security gate installations with full access control typically range $8,000-$18,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Yorba Linda
We install and service operators from the brands Yorba Linda homeowners already have on their driveways. Our techs are factory-trained on BFT, Linear, Viking, and Ghost Controls, among others. That matters because a mismatched operator kills a good gate faster than anything else. We spec the right operator for the gate weight, wind exposure, and daily cycle count, and we stock common parts locally so warranty work and adjustments happen fast. No waiting weeks on a sea-container part for a gate that will not open.
Common Gate Installation Problems We See in Yorba Linda Homes
- Clay soil post heave. The expansive clay in the Puente Hills foothills absorbs winter moisture and shrinks in summer heat. Posts shift several inches over a few seasons, which looks like a hinge or operator problem. What it actually requires is post resetting before any hardware fix will hold.
- Santa Ana wind racking. Fall and winter winds funnel through Yorba Linda’s inland canyons at speeds that twist gate frames and derail slide tracks. Hillside exposures amplify the gusts. We install wind-rated operators and reinforce gate frames for lateral load on any hillside install.
- Undersized operators on heavy ornamental gates. A custom wrought-iron gate can weigh 800 pounds or more. An operator rated for half that weight burns out in two years. We calculate gate weight, wind load, and daily cycles before specifying anything.
- Wood gate splitting from dry inland heat. Yorba Linda’s summer heat is harder on wood gates than coastal climates. We recommend steel or iron for driveway gates where longevity matters, and we treat and brace wood gates that must match an existing aesthetic.
Pricing for Gate Installation in Yorba Linda, CA
Here’s what you can expect to pay for a new gate in Yorba Linda, installed and warranted. These are real ranges from jobs we have done in this city, not national averages.
- Single swing gate, steel, with operator: $3,800 - $6,500
- Single swing gate, ornamental iron, with operator: $5,000 - $9,500
- Double swing gate, ornamental, with automation: $8,000 - $16,000
- Sliding gate, steel or iron, with automation: $5,500 - $12,000
- Security gate with intercom and camera entry: $8,000 - $18,000
- Pedestrian gate, steel, with keypad: $1,800 - $3,500
- Heavy-duty ranch gate for equestrian property: $4,500 - $10,000, depending on width and post requirements
What moves the price: gate material and weight, operator type, post footing depth, access control complexity, and whether we are removing an old gate. The price we quote is the price you pay. Estimates are free, and we give them in writing before any work starts. Call (424) 395-3381 to schedule yours.
We Also Serve Cities Near Yorba Linda
We work throughout the surrounding area, including Placentia, Brea, Villa Park, and Orange. If your property sits close to a neighboring city line, we can still help. Our Gate Installation in Yorba Linda coverage includes all of the city and the communities around it, so you won’t hear “that’s outside our area” for a property that’s practically on the boundary.
Serving Yorba Linda, CA - Our Local Coverage Area
We’re based in the Yorba Linda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Yorba Linda
The panel usually isn’t the problem. In Yorba Linda’s hillside foothills, the expansive clay soil causes gate posts to heave and shift over a few seasons, which makes the gate sag regardless of how new the panel is. The fix is resetting the posts into deeper, properly anchored footings before re-hanging the gate. Call (424) 395-3381 and we’ll come out, level-check the posts, and tell you exactly what’s moving and what needs to be done.
Yes. Equestrian-zoned lots in Yorba Linda require wider-clearance gates, often 12 to 16 feet, built for horse-and-trailer access. That width demands heavier posts and deeper footings than a standard residential gate. We set posts to 42 inches minimum on equestrian properties and use heavier-gauge steel to match the gate width and daily swing cycles. For an exact spec on your property, call us for a free site visit.
Santa Ana winds push against long slide gates like a sail, which racks the frame, bends hinge posts, and derails track rollers over time. We size slide gate track and rollers for wind load specific to your exposure, not just gate weight. On hillside lots with direct canyon exposure, we also recommend wind-rated operators. If your slide gate is already binding or derailing, call (424) 395-3381 for a free estimate on the repair.
Yes. We integrate new ornamental gates with existing intercom and camera systems on Yorba Linda custom homes regularly. That includes matching hardware finishes, wiring keypads and entry panels, and ensuring the operator talks to whatever access control you already have. We train on nine automation brands, including BFT, Linear, and Ghost Controls, so we can match your current system or replace it cleanly. Call (424) 395-3381 and we’ll assess your setup.
Yes, automatic gate operators in California are required to have entrapment protection devices, including safety edges, photo eyes, or both, depending on the gate type and installation. We install compliance-grade safety equipment on every automated gate we hang, and we test it before we leave. If you have an older gate without visible safety edges, call us and we’ll check what’s there and what needs to be added.
What Makes Yorba Linda Gate Installations Different
You can’t copy-paste a gate installation from flatland Orange County into the Yorba Linda hills. This city has one of the highest concentrations of equestrian-zoned properties in Orange County, which means gate work here runs two completely different tracks. On one side, ornate automated wrought-iron driveway gates on custom hillside estates. On the other, heavy-duty pipe-rail or wood ranch gates built wide enough for a horse trailer and built tough enough to take daily use. Neighboring flatland cities rarely need the second kind. Yorba Linda needs both.
On a hillside lot off Fairmont Boulevard, we set a custom 18-foot ornamental steel swing gate with a LiftMaster operator and matched intercom and camera entry. The clay soil had already heaved the original hinge posts several inches, so we poured new post footings to 42 inches and installed a Ghost Controls keypad entry before re-hanging the gate true. It now swings silently even during Santa Ana wind events. That job only worked because we understood what the ground was doing under that gate. A hinge swap would have failed inside a year.
Then add the climate. Yorba Linda’s inland canyons funnel Santa Ana winds that twist gate frames and derail slide tracks faster than lower-lying Orange County ever sees. The dry summer heat splits wood gates and bakes the rubber seals on automatic operators. Any gate company working here has to build for wind load, soil movement, and heat cycling. We do. That’s why we spec deeper posts in the Puente Hills foothills, brace frames for lateral load, and use operators rated for the actual gate weight and daily cycles, not whatever’s cheapest on the shelf.
If you’re in Yorba Linda and want a gate done right, call us at (424) 395-3381 for a free estimate. We’ll measure, quote, and build it to last. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Yorba Linda since 1984.