Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Installation Across Orange
Gate installation in Orange runs anywhere from $1,800 for a straightforward pedestrian gate to $14,000 or more for a custom automated driveway gate with intercom and access control. Most jobs are quoted, built, and installed within two to three weeks, and every price is settled before a single hinge is bolted in place. If you live in Old Towne, off Santiago Canyon Road, or anywhere in the 92856, 92857, or 92859 zip codes, our crews know your streets, your housing stock, and the wind that comes out of that canyon. Call (424) 395-3381 and a live person answers, day or night.
Why Ironworks Gate Co. Is Orange’s Preferred Gate Installation Company
Ironworks Gate Co. has been welding, hanging, and automating gates for over 42 years, since 1984. Our dispatch and scheduling is coordinated from our metro office, and our crews serve Orange locally. We are not a general contractor who occasionally touches a gate. We are a dedicated gate shop that fabricates, installs, and services driveway gates, pedestrian gates, slide gates, swing gates, and the automation that drives them. Homeowners in Orange call us for the same reason they call a specialist for a roof or an electric panel: this is the work we do every day.
The neighborhoods we work in here tell the story. A Craftsman bungalow on a tree-lined street near the Plaza needs a different gate than a 1980s estate home in 92857 backing up to the canyon. Our technicians know the difference because they have seen it hundreds of times. We show up in uniform, background-checked, and we treat your property the way we would treat our own mother’s. Every job we complete is protected by the 90-Day Done Right Promise, a written guarantee that says if it is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard, and it applies to every gate we hang in Orange.
Victor Salinas leads our crews, and he has trained our technicians on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when a slide gate in 92859 faults out and the homeowner does not want to hear that we need to wait two weeks for a new board. We carry parts. We fix it right. We stand behind it.
Our Gate Installation Services in Orange
Driveway Gate Installation
Driveway gates in Orange fall into two worlds. West of the 55, you are looking at older properties where a driveway gate has to respect the home’s architecture and often the city’s historic guidelines. East of the 55, in the 92857 and 92859 tracts along Santiago Canyon Road and near Irvine Regional Park, you are dealing with long sloped concrete drives and half-acre-plus lots where a slide gate is almost always the right call. We fabricate, set posts, install the track or the hinges, and wire the operator. A standard single swing driveway gate in Orange runs $3,500 to $7,500. A custom slide gate with automation starts around $6,000 and can reach $14,000 depending on length, weight, and access control features.

Pedestrian Gate Installation
In Old Towne Orange, a pedestrian gate is not just a gate. It is the first thing a visitor sees from the sidewalk, and in the historic district, the city has opinions about what that looks like. We fabricate ornamental wrought iron pedestrian gates with period-style latches, spear-point pickets, and hand-forged details that match Craftsman and Victorian homes built between 1905 and 1940. A custom ornamental pedestrian gate in Orange typically runs $1,800 to $4,200 installed, and we handle the post footing, the hinges, the latch, and any matching hardware. Off-the-shelf hardware often will not fit these older posts, and we build to match what is already there.

Sliding Gate Installation
Most of the slide gate work we do in Orange is in the eastern hills, where long driveways and wide openings make a swing gate impractical. A slide gate on a sloped drive off Santiago Canyon Road needs a longer rack and pinion, proper roller alignment, and a loop detector set correctly for the grade. We set deep concrete footings and reinforce the rack so the gate does not slam or fault when the Santa Ana winds push through the canyon mouth. Slide gate installation in Orange runs $5,500 to $12,000 including the operator, track, receiver, and one remote, and we quote the exact number before any work begins.

Custom Swing Gate Installation
A custom swing gate is the right choice for Orange homes where a gate is an architectural statement as much as a security feature. We build steel and ornamental iron swing gates to spec, with the hinges sized for the actual weight of the gate and posts set deep enough to hold it. On hill estates in 92857, we add wind-rated hardware and stop posts so a single Santa Ana event does not bend the hinge leaves or strip the operator gears. Custom swing gate installation with a single operator in Orange runs $3,800 to $9,500, and a matched pair of double swing gates runs higher depending on width, weight, and finish.
Every installation includes a free measure, a written quote, and the price locked before we start. We do not change the number halfway through. That is not how Ironworks Gate Co. works.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Orange
We are certified on nine gate-automation brands, and we keep parts in stock for the ones we see most often in Orange: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On this side of the county, a lot of hill tract estates run BFT or Linear slide gate operators, and we keep boards, gears, and replacement remotes for those on hand. Old Towne properties with older driveway gates tend to use Viking or Ghost Controls, and those we service the same day most weeks. Certified means we can diagnose and repair whatever is already on your driveway without telling you it needs to be replaced first.
Common Gate Installation Problems We See in Orange Homes
- Swing gates that slam in Santa Ana winds. Houses in 92857 and 92859 at the base of Santiago Canyon take the brunt of the wind funnel, and a gate without wind-rated hinges or a stop post will bend leaves or strip the operator gears in one bad event. We see it every fall and winter.
- Period ornamental gates with corroded fasteners. Old Towne Orange gates from the 1920s and 1930s often have mortise locks and latches held together by rust. Off-the-shelf replacements will not match the period look, and changing the visible hardware can conflict with historic design review.
- Slide gates that fault on sloped drives. Long concrete driveways in the hill tracts have a grade, and when a slide gate’s rack and pinion or loop detector is not aligned for that slope, the gate slams at the end of travel or the opener faults repeatedly. It looks like an electronics problem. It is an installation problem.
- New automated gates with visible modern entry hardware. In the historic district, a non-period keypad or photocell housing mounted where the street can see it can get a new installation flagged. We hide or style the entry components so the gate reads as original to the house.
Only in Orange: Two Gate Worlds, One Service Area
Nowhere else in Orange County does a gate installer have to switch from preserving a 1920s wrought-iron design under Old Towne’s historic review to engineering a wind-rated slide gate for a 1980s estate at the base of Santiago Canyon. Villa Park, Tustin, Placentia, and Santa Ana each have their own character, but none of them has both constraints inside one service area. Orange does. That is the job.
On a 1920s Craftsman in the Old Towne Orange historic district, our crew installed a custom ornamental pedestrian gate with period-style latches after flagging that the previous welded patch would have failed design review. We matched the hinge post spacing to the original non-standard layout, which means the gate swings true and reads like it has been there for a hundred years. Later that same week in 92857 off Santiago Canyon Road, we set deep post footings and a reinforced rack and pinion on a 500-pound slide gate for a home that had lost two operators to Santa Ana gusts. That range of work in a single week is normal here. We plan for it.
How Orange’s Climate and Geography Affect Gate Installation
The Santiago Canyon acts as a wind funnel during fall and winter Santa Ana events. The communities at its base, mostly in 92857 and 92859, regularly see sustained gusts that hammer unsecured swing gates back and forth until the hinges crack or the operator gears give out. This is the most common failure mode we see in Orange’s eastern hill tracts, and it is not gradual wear. It is one bad wind event and the gate is done. The fix is wind-rated hardware, a stop post, and an operator sized for the gate’s actual weight, not the weight on the box. West of the 55 in Old Towne, the climate story is different: coastal air and century-old ironwork mean corrosion and seized fasteners, and the fix there is careful hardware matching, not brute force.
Pricing for Gate Installation in Orange, CA
Here are honest numbers for the Orange market. A custom ornamental pedestrian gate in Old Towne runs $1,800 to $4,200 installed. A standard single swing driveway gate runs $3,500 to $7,500. A slide gate with automation on an eastern hill tract home runs $5,500 to $12,000. A custom double swing gate with matched operators can push past $14,000 depending on the work. What moves the price is the gate’s size and weight, whether it is ornamental or simple rail, the operator brand, and the access control: keypad, intercom, vehicle loop, or camera. Every quote is written, every price is agreed before work starts, and we do not add charges after the fact. Call (424) 395-3381 for a free estimate. We also offer a Free Second Opinion on any written estimate you have from another company, and active or retired military and seniors get 5% off, always.
We Also Serve Cities Near Orange
While this page is about Gate Installation in Orange, our crews regularly work in Villa Park, Tustin, Placentia, and Santa Ana. If you are on the edge of Orange or just over a city line, call us anyway. Our Gate Installation team covers the whole area, and the drive is short.
Serving Orange, CA - Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Orange
It depends on the scope and visibility, but in many cases yes, or at least close enough that you should plan for it. Old Towne Orange is one of the largest historic districts in California, and replacing or adding a gate that is visible from the street can fall under the city’s preservation design review. The safest path is to keep the gate’s period character: match the original latch style, hide modern entry components, and avoid welded patches that read as repairs. We know the review process and we fabricate gates that pass it. Call (424) 395-3381 and we will talk through your property’s situation.
Because the gate lacks wind-rated hardware and a stop post, and the Santiago Canyon wind funnel hits that specific area harder than almost anywhere else in Orange County. A gate that is not secured against sustained gusts will swing past its normal travel, bend the hinge leaves, and eventually strip the operator gears. The fix is not a bigger motor. It is structural: reinforced hinges, a stop post, and an operator sized for the real weight of the gate. We do this repair in 92857 and 92859 more than any other, and we can usually do it in one visit. Call (424) 395-3381 to schedule.
A slide gate operator with the right rack and pinion alignment, a properly set loop detector, and a motor rated above the gate’s actual weight is what works. On sloped drives off Santiago Canyon Road, the grade changes the gate’s travel geometry, and a generic install will fault or slam. We install and service all nine major brands, and for most Orange hill tract estates we recommend BFT or LiftMaster slide operators with reinforced racks. The brand matters less than the installation. Call (424) 395-3381 and we will measure your drive and give you a written quote.
Automatic gates in California are required to have entrapment protection: photoelectric eyes or contact edges that reverse the gate if a person, pet, or vehicle is in the path. If your gate reverses on its own when it hits something soft, it is probably compliant. If it keeps pushing, it is not, and that is a safety violation. We check entrapment protection on every installation and every service call in Orange, and we will tell you honestly if your existing system needs to be brought up to code. Estimates are free.
Yes, and that is exactly the kind of work we do in Old Towne Orange. We replace corroded fasteners, mortise locks, and latches with period-appropriate hardware that matches the original style and finish. Non-standard post spacing on these older gates means off-the-shelf parts rarely fit, so we fabricate what the gate needs. The result is a gate that closes like it did in 1925 and still looks like it belongs on your house. Call (424) 395-3381 for a free look at your gate.
Get a Free Estimate for Gate Installation in Orange
We serve all of Orange: Old Towne, the Plaza district, the 92856 corridor, and the hill communities in 92857 and 92859. Every job gets a written quote, a clear schedule, and the 90-Day Done Right Promise behind it. We answer the phone 24 hours a day, 7 days a week. Call (424) 395-3381 and talk to a person, not a voicemail. A square deal, an upfront price, and a gate that is done right. That is how we work in Orange.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Orange with gate installation, repair, and automation for over 42 years.
Before
After
Before
After
Before
After